phone: 270.753.4474

Aftermarket parts for Chevrolet and GMC vehicles.

  • 1988-1994 Chevrolet/GMC Truck Steering Shaft

    1988-1994 Chevrolet/GMC Truck Steering Shaft

    Tired of fighting your steering? Tired of the constant swaying back and forth? We have the fix for you! Introducing our 88-94 (Old Body Style ONLY) Steering Shafts. Eliminate that worn out rag joint with a U-joint. Simply unbolt your steering shaft and...

    $175.00 - $200.00
  • Disc Brake Adapter 14 Bolt Semi Float 6 Lug Rear

    Disc Brake Adapter 14 Bolt Semi Float 6 Lug Rear

    These Billet Aluminum Single Caliper Disc Brake Adapters are the perfect place to start when converting your 1988 - 1998 Full Size Truck GM 14 bolt vehicle from drum brakes to disc brakes.  The adapters work on 14 bolt semi float drum rear ends 6...

    $200.00
  • 88-98 Manual Master Cylinder Bolt On Kit

    88-98 Manual Master Cylinder Bolt On Kit

    Need some more room under the hood or just sick of seeing that ugly vacuum booster? This direct bolt on manual master cylinder kit is exactly what you need. Comes with everything needed for install. Using a Strange Engineering manual master cylinder with...

    $225.00
  • Door Bushing Installation Tool

    Door Bushing Installation Tool

    Simple easy tool designed to install your door bushings with ease. Put those hammers away and pull them down flush in seconds! Using a 3/4" and 1/2" wrench this makes installing the bushings a breeze.   Set Includes - 1 Hex Nut, 1 Washer, 1...

    $9.99
  • GM 14 Bolt 60MM Spacer For NBS Rear Brake Conversion

    GM 14 Bolt 60MM Spacer For NBS Rear Brake Conversion

    These Billet Aluminum 60MM Spacers are the perfect place to start when converting your 1988 - 1998 GM 14 bolt vehicle from drum brakes to disc brakes using NBS (New Body Style) factory setup.   Includes - 2 Spacers   All Parts Proudly Made in...

    $130.00
  • Heavy Duty Chevrolet/GMC 88-98 Truck Door Pin Rollers

    Heavy Duty Chevrolet/GMC 88-98 Truck Door Pin Rollers

    Designed to replace those bent or broken roller pins that have seized up over the years.  A direct replacement for the original rollers. Simply cut the old one out and bolt this right back in place. Highly recommend getting the door spring tool for...

    $35.00 - $130.00
  • 1995-2000 Chevrolet Truck Upper Half Steering Shaft

    1995-2000 Chevrolet Truck Upper Half Steering Shaft

    Tired of fighting your steering? Tired of the constant swaying back and forth? We have the fix for you! Introducing our 95-00 (Old Body Style ONLY) UPPER Steering Shaft. This is the upper shaft that connects to the column and goes through the firewall...

    $125.00
  • 5 Lug Pattern Redrill Jigs

    5 Lug Pattern Redrill Jigs

    These 5x5 ReDrill Jigs allow you to drill out your axle and drum/disc brakes to a 5x4.500 or 5x4.750 pattern. Doing this opens up what wheel choice you may go with. Be sure to check the hub diameter of your new wheels compared to what these trucks have...

    $140.00
  • 92-00 Tahoe/Yukon/Blazer Roof Rack Delete Plates

    92-00 Tahoe/Yukon/Blazer Roof Rack Delete Plates

    4 Billet Aluminum Plates for Deleting roof rack on the 92-00 GM Tahoes, Yukons, and Blazers with 4 post roof racks. Featuring an O-ring design with counter sunk stainless hardware. Direct bolt on design to get rid of those roof racks. Available in both...

    $100.00 - $110.00
  • 88-98 Billet Step Side Plates 88-98 Billet Step Side Plates 88-98 Billet Step Side Plates

    88-98 Billet Step Side Plates

    Billet Step Side Plates for the 88-98 Step Side GM Pickups! An item that many of you have asked to see being remade. These are cut from a 6061 aluminum. These come with stainless steel hardware designed to bolt right in. Each plate will take 5 studs each...

    $325.00 - $380.00
  • 88-98 GM Truck Billet Door Vents

    88-98 GM Truck Billet Door Vents

    Billet 88-98 GM truck door vents. Featuring aluminum mesh behind to add to the look! Mesh can be easily removed if that is not the look you prefer. Bolted in reusing your factory hardware. Available in both raw machined aluminum or black anodized finish...

    $115.00 - $135.00
  • 92-00 Suburban Roof Rack Delete Plates

    92-00 Suburban Roof Rack Delete Plates

    8 Billet Aluminum Plates for Deleting roof rack on the 92-00 GM Suburbans with 8 post roof racks. Featuring an O-ring design with counter sunk stainless hardware. Direct bolt on design to get rid of those roof racks. Available in both raw machined...

    $160.00 - $175.00
  • Billet LS1 Intake EGR Block Off Plate

    Billet LS1 Intake EGR Block Off Plate

    LS1 Billet EGR Intake Block Off Plates. Designed for a cleaner look for removing EGR. Also available with 3/8 NPT hole for IAT sensor relocation for swaps. DESIGNED FOR OFF ROAD USE ONLY!!! Includes - 1 Block off Plate, 1 button head bolt, 1 o-ring Parts...

    $18.00 - $19.00
  • Billet LS Turbo Oil Feed/Block Off Plates

    Billet LS Turbo Oil Feed/Block Off Plates

    LS Billet Oil Feed Plate. Mounts to the factory oil cooler location with the factory o-ring and our supplied hardware. Designed to help make it easier to feed your project with the oil supply it needs. Whether its sensor mounting, turbos, superchargers...

    $18.00 - $19.00
  • GM Truck Dash Savers

    GM Truck Dash Savers

    Bolt these easy to use dash savers on your gm truck dash to extend the life of it. Keeping the bounce to a minimum and saving the dash from cracking. Black 3D printed from a Onyx material. Easily painted to match your trucks interior. Holding shape to...

    $22.00
  • Stainless Steel Door Strikers Stainless Steel Door Strikers

    Stainless Steel Door Strikers

    Stainless Steel replacement door strikers. These fit many makes and models including the 88-98 Chevrolet/gmc trucks. Paired with a set of our bushings and rollers this will make the doors shutting like new. Direct bolt in replacement like OEM fitment,...

    $25.00 - $45.00